1. Tools, torx
2. Side view mirrors form Passat B7
1. Step is to remove door card / door panel
You have have 4 screws, first thing is to pop the cover on your buttons side(that control windows and mirrros)
Other two buttons are located at the bottom.
When you are done, just pull the door panel and it will come off.
Disconect door handle, and conectors for windows and mirror.
First remove the speaker, just pull it of gently and it will come off.
Now you will see 3 screws that are holding mirror fixed to its position, unscrew them, and disconect mirror plug form the door module.
Now its time to install new mirror from B7. Everything is the same, same screws, same holes, just put everything together, plug the new harness into door module and see if it works.
If you want puddle lights (you will need GEN3 door module), you need to code it in VCDS.
Coding for puddle lights is:
1. Find driver door
2. Go coding
3. Coding helper
4. Add +2 on your existing code (if you had 181, now write 183)
5. Click do it, and if the code is accepted, you have puddle lights working now.
Do the same thing for diver doors, just in VCDS go to Passenger door and repeat the procedure.
Same procedure is also for the passenger door panel, you have 4 screws on passenger side. Just pop up the plastic on the door handle, and you'll see 2 screws, and on the bottom you have two more. After you remove them, same procedure as was for the driver side.
Coding for folding mirros:
1. Find driver door
2. Go coding
3. Coding helper
4. Add +4096
Nema komentara:
Objavi komentar